ITech IT6512D - System:beeper:immediate; System:beeper[:State]; System:version

SCPI Command Description
Copyright© Itech Electronics Co., Ltd. 16
SYSTem:BEEPer:IMMediate
This command is used to test the beeper. After executing this command, the
instrument will beeper immediately.
Command syntax
SYSTem:BEEPer:IMMediate
Arguments
None
Example
SYST:BEEP:IMM
Query syntax
None
SYSTem:BEEPer[:STATe]
This command is used to turn on/turn off the beeper, when the arguments is set
to 1/ON, the beeper is enabled and press keyboard will beeper, otherwise, it is
mute.
Command syntax
SYSTem:BEEPer <bool>
Arguments
OFF|ON|0|1
Example
SYSTem:BEEP 1
Query syntax
SYSTem:BEEPer[:STATe]?
Returns
0|1
SYSTem:VERSion?
This command is used to query the current SCPI version. The returned
parameter is a string like “YYYY.V “, in which the YYYY is the year of that
version, V is the software version of that year.
Command syntax
SYST:VERS?
Arguments
None