ITech IT6512D - Load:current:protection:state; Load:current:protection[:Level]

Load Related Command（IT6500C）
Copyright© Itech Electronics Co., Ltd. 54
Unit
S
Reset Value
0.001
Example
LOAD:CURR:FALL 1.0
Query syntax
LOAD:CURRent:FALL[:LEVel]? [MINinum|MAXimum]
Returns
NRf
LOAD:CURRent:PROTection:STATe
This command is used to set load OCP state.
Command syntax
LOAD:CURRent:PROTection:STATe <bool>
Arguments
ON|OFF|1|0
Reset Value
1
Example
LOAD:CURR:PROT:STAT 1
Query syntax
LOAD:CURRent:PROTection:STATe?
Returns
0|1
LOAD:CURRent:PROTection[:LEVel]
This command is used to set current value of load OCP.
Command syntax
LOAD:CURRent:PROTection[:LEVel] <MINimum|MAXimum|DEFault|NRf>
Arguments
MINimum|MAXimum|DEFault|NRf