ITech IT6512D - Fetch[:Scalar]:Current[:DC]; Measure[:Scalar]:Power[:DC]; Fetch[:Scalar]:Power[:DC]; Fetch

Input Measuring Commands
Copyright© Itech Electronics Co., Ltd. 27
Unit
A
Example
MEAS:CURR?
FETCh[:SCALar]:CURRent[:DC]?
This command is used to fetch the DC current value in buffer.
Command syntax
FETCh[:SCALar]:CURRent[:DC]?
Returns
<NRf>
MEASure[:SCALar]:POWer[:DC]?
This command is used to enquire the latest output power .
Command syntax
MEASure[:SCALar]:POWer[:DC]?
Arguments
None
Returns
〈NRf〉
Returns Unit
W
Example
MEASure:SCALar:POWer:DC?
FETCh[:SCALar]:POWer[:DC]?
This command is used to fetch the power value in buffer.
Command syntax
FETCh:POWer?
Returns
<NRf>
FETCh?
This command is used to fetch the measurements of voltage, current and
power.