ITech IT6942A - Digital Voltmeter (DVM) Operation; Remote Sense Functionality

Trigger Commands
Copyright ©ITECH Electronic Co., Ltd. 22
Chapter5 Trigger Commands
TRIGger
This order is used to generate a trigger signal when trigger source is in BUS
mode. The function of this order is similar to *TRG.
Order syntax:
TRIGger[:IMMediate]
Parameters:
none
Related orders:
*TRG TRIG:SOUR
TRIGger:SOURce
This order is used to choose the source of trigger signal. Power supply can
receive the signal from front panel by pressing Trigger button. Or receive a
trigger signal by BUS. When you execute order *RST, the trigger mode should
be set in MANUAL.
Order syntax:
TRIG:SOUR <mode>
Parameters:
BUS|MANUAL
Query syntax:
TRIGger:SOURce?
*RST value:
BUS|MANUAL
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com