ITech IT6942A - List:save; List:load

List Commands
Copyright ©ITECH Electronic Co., Ltd. 39
Parameters:
MIN~MAX|MIN|MAX
Unit:
S
Example:
LIST:TIME 1,3
Query syntax:
LIST:TIMEr?
Example:
LIST:TIME? 1
Return parameters:
<NR2>
LIST:SAVE
This order is used to save the list file to specified memory region.
Order syntax:
[SOURce:]LIST:SAVE <NR1>
Parameters:
0~9
Example:
LIST:SAVE 1 //save the edited list file to the first set of memory region.
LIST:LOAD
This order can recall the list file saved before from specified memory region.
Sending query orders can inquire which group file you have recalled.
Order syntax:
[SOURce:]LIST:LOAD[:IMMediate] <NR1>
Parameters:
0~9
Example:
LIST:LOAD 1
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com