ITech IT6942A - Major Technical Parameters: IT6922 B, IT6932 B

Measurement Commands
Copyright ©ITECH Electronic Co., Ltd. 35
Order syntax:
FETCh[:VOLTage][:DC]?
Return parameters:
<NR2>
MEASure:POWer?
This order is used to measure the current output power value.
Order syntax:
MEASure[:SCALar]:POWer[:DC]?
Return parameters:
<NR2>
FETCh:POWer?
This order can read the latest power value from the sampling buffer.
Order syntax:
FETCh:POWer[:DC]?
Return parameters:
<NR2>
MEASure:DVM?
This order is used read the latest measured value of DVM meter and return this
value.
Order syntax:
MEASure[:SCALar]:DVM[:DC]?
Return parameters:
<NR2>
FETCh:DVM?
This order is used to read the latest data of DVM meter from the sampling
buffer.
Order syntax:
FETCh:DVM[:DC]?
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com