Operation: C12.19 C1SD, C1ST, and C1SL Versions
CENTRON® Meter Technical Reference Guide 65
Event, Alarm, and Tamper Assignments for the CENTRON R300CD/CD3:
For all Fatal Errors, the R300CD/CD3 module stops transmitting.
For Non-Fatal Errors, transmission can be controlled via PC-PRO+ Advanced software.
Meter Inversion
(Tamper Circuitry)
SCM 1 -
Indicator 1
SCM 1 -
Indicator 1
SCM 1 -
Indicator 1
Meter Removal
(Tamper Circuitry)
SCM 1 -
Indicator 2
SCM 1 -
Indicator 2
SCM 1 -
Indicator 2
Demand Reset
(Push Button)
N/A
SCM 2 -
Indicator 1
SCM 2 -
Indicator 1
Low Battery N/A
SCM 2 -
Indicator 2
SCM 2 -
Indicator 2
End of Billing Schedule
(1 year from end)
N/A
SCM 2 -
Indicator 2
SCM 2 -
Indicator 2
Clear Billing Data N/A N/A
SCM 3 -
Indicator 1
Energy Register Edit N/A N/A
SCM 3 -
Indicator 1
Test Mode Entered N/A N/A
SCM 3 -
Indicator 1
TOU Schedule N/A N/A
SCM 3 -
Indicator 1
Mass Memory Error N/A N/A
SCM 3 -
Indicator 1
Self Read Cleared N/A N/A
SCM 3 -
Indicator 1
Meter Reconfigured N/A N/A
SCM 3 -
Indicator 1
Energy Reconfigured N/A N/A
SCM 3 -
Indicator 1
ANSI Security Fail N/A N/A
SCM 3 -
Indicator 2
Reverse Power Flow N/A N/A
SCM 3 -
Indicator 2
Loss of Phase N/A N/A
SCM 3 -
Indicator 2
To Next Page
Loading...
