ITRON Centron - Page 76

Operation: C12.19 C1SD, C1ST, and C1SL Versions
66 CENTRON® Meter Technical Reference Guide
Using The PC-PRO+ Advanced programming software, a user can:
 Configure the quantity(s) to be transmitted.
 Select the type of registers to be transmitted.
 Select the number of digits for the data to be transmitted, as well as the number of
decimal place digits for the data.
 Select the one of three date formats to be transmitted as ERT information.
 Enable TOU and select the TOU rate to be transmitted
When using Type 8 ERTs, the format for the KWh value should be 7.2 (XXXXX.XX)
and the format for the demand value should be 7.4 (XXX.XXXX).