ITS Telecom Pancode - Page 18

Programming
16 PanCam/Pantel/Pancode Installation and Programming Manual
OPERATION COMMAND DEFAULT
Delete a
destination
number
assigned to
Day, Night, or
Error DNs.
This command
must be entered
separately for
each X value
*360 + X + #
where:
X = 1 Day
X = 2 Night
X = 3 Error
Programming
the pre fix-
digit(s) for
PBX
extensions
dialing. When
input to the
PanCam - C/
Pancode begins
with these
digits, the
PanCam - C/
Pancode will
process them as
extension
dialing
*170 + prefix -digit(s) + #
Maximum 4 digits
(Do Not use * or # as prefix
digit)
To cancel this operation,
enter:
*170 + #
No
default
Pancode Indoor
only
*371
Digit(s) to open
the door from
any extension
*441 +XXXX + #
where:
XXXX= Digits (0 - 9)
Note: Up to 4 digits.
8