ITW Dynatec DynaFiber UFD - Strand Coating System (SCS)

ITW Dynatec
Chapter 8
Options & Accessories
Page 100 UFD Applicator, Manual 40-43, Rev. 6.16
Strand Coating System (SCS)
Dynatec’s Stand Coating System is an application used for adhesive coating of elastics. A V-guide
holds the elastic strand in position in front of the applicator’s nozzle in order to precisely coat it with
adhesive as it passes before the module’s orifice. “Back-feed” refers to an elastic strand entering the
guide from behind the module (see below) while “front-feed” refers to a strand entering from in front of
the guide (see next page).
Back-Feed SCS V-Guide
Back-Feed Guide
Part Number
SCS V-Guide
Omega 12 SCS
Nozzle
Omega 16 SCS
Nozzle
111585
1 Strand
111574
111565
111586
2 Strand / 5mm
111575
111566
111587
3 Strand / 5mm
111576
111567
111588
4 Strand / 5mm
111577
111568
111589
3 Strand / 4mm
111578
111569
111590
2 Strand / 8mm
111570
111591 2 Strand / 9mm 111571
111592
2 Strand / 10mm
111581
111572
111593
5 Strand / 5mm
111582
111573
111594
4 Strand / 4mm
111579
111583
111595
2 Strand / 3mm
111580
111641
3 Strand / 6mm
111639
111640
111653
3 Strand / 3mm
111651
111652
PN 111546: SCS Guide Roller Kit (guides up to five strands)
PN 111548: Strand Guide Arm & Roller Assembly (includes Kit PN 111546)
Guide roller kit
PN 111546
SCS Omega Nozzle
Back-feed
SCS V-guide
Solenoid relocated
to side inlet ports for
roller clearance.
Solenoid can be
positioned on either
side of Applicator.
Strand direction
Strand guide arm and roller assembly,
PN 111548 (includes Kit PN 111546)