Chapter 7
Component Illustrations & Bills of Materials
Page 54 UFD Applicator, Manual 40-43, Rev. 6.16
1-Port UFD Vertical & Horizontal Apply Applicator Assemblies
Item No. Part Number Description Qty.
Module, MR13, Vertical, Extended (UFD0501V1A1D2S)
Module, MR13, Horizontal (UFD0501H1A1D2S)
Module, MR13, Horizontal/ Intermittent (Special)
Module, HSSB, Vertical (used with Festo Solenoid)
(for more module options, see Chapter Model Designation Guide)
Purge Valve Assembly, 1/4 BSPP (optional)
Solenoid Manifold Assembly
Tube Stainless Steel, 1/4 x .065w x 3.5
Service Block Assembly (DCL
Service Block Assembly (NOR)
Service Block Assembly (MEL-J)
Service Block Assembly (MCV)
Service Block Assembly (MEL-PT)
Service Block Assembly (J & M)
Terminal Block, 2 Pos, Ceramic
Washer Int Tooth, Lock #4
Fitting Straight, 6 JIC x 1/4 BSPP
Fitting Plug, 1/4 BSPP, Soc
Cable Assembly, BF240v, DCL, 9.0 (Built-in Sensor)
Cable Assembly, BF240v, MCV, 9.0 (Built-in Sensor)
Cable Assembly, BF240v, NOR, 9.0 (Built-in Sensor)
Cable Assembly, BF240v, MEL-J, 9.0 (Built-in Sensor)
Cable Assembly, BF240v, MEL-PT, 9.0 (Built-in Sensor)
Cable Assembly, SB, JM, w/Sol
Mounting Clamp, 13mm, MK2
Side Cover, Service Block
Side Cover, Service Block
Conduit Assembly (next to cable assy., not shown, J & M)
Heater Cartridge, 150W, 240V, 10 x 40mm
Filter Kit, M20 Spin-on (includes N03812 O-ring & 116243 washer)
Filter Kit, 200 mesh Spin-on (includes N03812 O-ring & 116243 washer)
Filter Cap, M20 Spin-on Filter
Cover, Left-Hand, Standard (used on all standard models)
Cover, Left-Hand, High speed (not shown)
Cover, Right-Hand, Standard (used on all standard models)
Cover, Right-Hand, High speed (not shown)