ITW Dynatec DynaFiber UFD - UFD Spray Module Assembly, Snuffback, Vertical, PN 111074

Chapter 7
Component Illustrations & Bills of Materials
ITW Dynatec
UFD Applicator, Manual 40-43, Rev. 6.16 Page 87
UFD Spray Module Assembly, Snuffback, Vertical, PN 111074
Note: PN 111074 module replaces PN 110559.
4x O-ring 2-011,
PN N00178
Module Assembly
PN 111074
O-ring 2-009,
PN N00176
O-ring 2-007,
PN N00174
Seal Plate,
PN 104987
Vertical Adapter
Assembly, PN 106222
2x Screw M3x10mm,
PN 103404
2x Screw M3x35mm,
PN 106951
O-ring 2-011, PN N00178
(part of Adapter Assembly
PN 106222)
Mounting face
Mounting face
Air seal: PN N00176
Glue seal: PN N00174
Air seal: PN 112581
Glue seal: PN 112580
On the above-type nozzle,
use o-rings shown to the right.
On the above-type nozzle,
use seals shown above.