Chapter 7
Component Illustrations & Bills of Materials
Page 70 UFD Applicator, Manual 40-43, Rev. 6.16
4-Port UFD Vertical & Horizontal Apply, 1 or 4 Program, Applicator
Assemblies
Item No. Part Number Description Qty.
Module, MR13, Vertical, Extended
Module, MR13, Horizontal/ Intermittent (Special)
Module, HSSB,Vertical (used with Festo Solenoid)
(for more module options, see Chapter Model Designation Guide)
Module Block-off Assembly
Solenoid Manifold Assembly, 1 Program
Air Manifold 4 Port,1 Program
Tube Stainless Steel, 1/4 x .065w x 3.5
Solenoid Manifold Assembly, 2 Program
Air Manifold, 2 Port, 2 Program
Tube Stainless Steel, 1/4 x .065w x 3.5
Service Block Assembly (DCL)
Service Block Assembly (MCV)
Service Block Assembly (NOR)
Service Block Assembly (MEL)
Filter Kit, M20 Spin-on (includes N03812 O-ring & 116243 washer)
Filter Kit, 200 mesh Spin-on (includes N03812 O-ring & 116243 washer)
Filter Cap, M20 Spin-on Filter
Terminal Block, 1 Pos, Ceramic
Washer Int Tooth, Lock #4
Fitting Straight, 6 JIC x 1/4 BSPP
Fitting Plug, 1/4 BSPP, Soc
Cable Assembly, BF240V, DCL, 9.0 (Built-in Sensor)
Cable Assembly, BF240V, MCV, 9.0 (Built-in Sensor)
Cable Assembly, BF240V, NOR, 9.0 (Built-in Sensor)
Cable Assembly, BF240V, MEL, 9.0 (Built-in Sensor)
Side Cover, Service Block
Heater, Cartridge, 200W, 240V, 10 x 90mm
Balanced Manifold Asembly (not shown)