ITW Dynatec DynaFiber UFD - Festo Solenoid Assemblies, PN 115055 & 115056

Chapter 7
Component Illustrations & Bills of Materials
ITW Dynatec
UFD Applicator, Manual 40-43, Rev. 6.16 Page 93
Festo Solenoid Assemblies, PN 115055 & 115056
Item No. Part Number Description Qty.
1
115055
Solenoid Assembly, Festo MH, QC Module, 6mm Inlet
115056
Solenoid Assembly, Festo MH, QC Module, 1/4” Inlet
2
113350
Valve Solenoid, 4 Way, 24V, Festo
1
3
113362
Push-in Fitting, M7 x 6mm Tube OD (used on PN 115055 only)
1
113363 Push-in Fitting, M7 x 1/4 Tube OD (used on PN 115056 only) 1
4
118390
Silencer
2
5
119731
O-ring 1mm WD x 7mm ID
2
6
113351
Fitting solenoid M7x1mm
2
7 N00175 O-ring 2-008 2
8
Cable, Solenoid (not included in assembly, see below*)
1
The above solenoid assemblies can be used with either of the two module
assemblies shown (above right) for reference:
9
113346
Module, HSSB, Vertical (“J” Option)
10
113550
Module, HSSB, Horizontal (“M” Option)
* Available Control Cables:
Cable
Part Number
Control Type
113361
Cable, solenoid, 24V, LED, 2.5m
114557 Cable, solenoid, 24V, LED, 10m
Module,
Vertical,
PN 113346
Module,
Horizontal,
PN 113550
High-Speed, Snuffback
Module Assemblies
Festo Solenoid Assembly PN 115055 (6mm inlet)
or
Festo Solenoid Assembly PN 115056 (1/4” inlet)