Chapter 3
Description and Technical Specs
UFD Applicator, Manual 40-43, Rev. 6.16 Page 21
Technical Data
Model UFD 0501 0502 0753 1004 1506
Number of Modules
1 2 3 4 6
Spacing between nozzle centers
- 25.2 mm 25.2 mm 25.2 mm 25.2 mm
Wattage Adhesive Manifold
450 450 525 600 900
Wattage Standard Air Perheater
600 600 900 1200 1200
Wattage Slim Line Preheater
400 400 600 800 1200
Supply voltage
200-240 VAC/ 1p/ 50-60 Hz
Dimensions
See dimensional layout on following page.
Weight (including module and
solenoid valve)
Model UFD0501: 3.52 kg (7.75 lb.)
Mounting
M6 x 1 screws with insulators or 1/2” rod mount,
insulated clamps, 12 to 13 mm rod
Temperature range
38°C to 218°C (100°F to 425°F)
Warm-up time
15 minutes for cold start/
5 minutes for module change only
Adhesive viscosity
100 to 30.000 mPa. sec. (100 to 30.000 centipoise)
Adhesive pressure range
68 bar maximum (1000 psi maximum)
Noise emission
70 dB(A)
Air pressure range
4.1 to 6.9 bar (60 to 100 psi)
Air pressure range for high
speed snuffback modules (only)
4.8 to 6.2 bar (70 to 90 psi)
Storage/ shipping temperature
-40°C to 70°C (-40°F to 158°F)
Ambient service temperature
-7°C to 50°C (20°F to 122°F)
CE approval granted
Yes
To Next Page
Loading...