ITW Dynatec DynaFiber UFD - UFD Spray Module Assembly, Horizontal, Snuffback, PN 110840; UFD Spray Module Assembly, High Speed, Vertical, PN 113778

ITW Dynatec
Chapter 7
Component Illustrations & Bills of Materials
Page 86 UFD Applicator, Manual 40-43, Rev. 6.16
UFD Spray Module Assembly, Horizontal, Snuffback, PN 110840
(Module Option “K”)
UFD Spray Module Assembly, High Speed, Vertical, PN 113778
(Module Option “A”)
Mounting face
Mounting face
Air seal: PN N00176
Glue seal: PN N00174
Air seal: PN 112581
Glue seal: PN 112580
On the above-type nozzle,
use o-rings shown to the right.
On the above-type nozzle,
use seals shown above.
Module Assembly, PN 110840
4x O-ring 2-011,
PN N00178
4x O-ring 2-011,
PN N00178
2x Screw M4x25mm
PN 100908