ITW Dynatec DynaFiber UFD - Chapter 9 Engineering Drawings & Schematics

ITW Dynatec
Chapter 9
Engineering Drawings & Schematics
Page 104 UFD Applicator, Manual 40-43, Rev. 6.16
Upgrade (Nickel RTD) Control Scheme PN 104551 (control option N)
Upgrade (J-type Thermocouple) Control Scheme (control option L)
Upgrade (Platinum RTD) Control Scheme (control option P)
Note: Pin out numbers
are not labeled on the
Upgrade connector.
To Applicator connector
To Applicator connector
To Air Heater connector
To Air Heater connector
To Air
Heater
To Applicator
To Applicator
To Air
Heater
To Air Heater connector
To Applicator connector
To Applicator connector
To Air Heater connector