49
Couple (connect) to a cell phone
To use the “Phone” mode, the compatible cell phone must be connected with
“Bluetooth” active. “Bluetooth” must be active on the cell phone to complete the
connection. This process may be carried out only if the vehicle is parked.
1 Switch on the ignition
2 Press the “Phone” button in the menu bar of the touch screen. If no telephone is
currently connected to the system, a pop-up will ask whether a cell phone should
be connected.
3 Press “Yes” to start the coupling process.
4 Search for available devices with active Bluetooth using the cell phone. If
“Bluetooth” is active, the cell phone will search automatically for devices that can
be coupled.
5 When the cell phone asks you to do so, select the name of the Infotainment
system and accept the connection query.
6 The telephone indicates that the connection has been completed.
7 Enter the four-digit PIN code shown on the infotainment display into the cell
phone.
8 Once the coupling process has been successfully completed, the system will ask
the user whether the cell phone should be saved as a favourite. If the user selects
“Yes”, this phone will take precedence over other coupled phones in range, and
will be connected automatically to the infotainment system once the user enters
the vehicle.
INFOTAINMENT
If the user selects “No”, then select the name of the infotainment system from the list of
devices available for coupling in the Bluetooth menu of the cell phone the next time you
get in the vehicle in order for the system to connect to the cell phone again.
To Next Page
Loading...
