14
3. Product Description
3.1 General
The Programat EP 3010 is a state-of-the-art press and ceramic furnace for dental applications. The firing chamber may be
heated up to max. 1200 °C by means of a heating element. The pressure for the press procedure is generated by a press
drive. Furthermore, the firing chamber has been designed in such a way that a vacuum may be created with a vacuum
pump. The firing / press programs are controlled with the corresponding electronic controls and software. Additionally, the
set and actual temperatures are continuously compared.
The Programat EP 3010 consists of the following components:
– furnace base with electronic controls
– furnace head with firing chamber and press drive
– cooling tray
– firing plate
– power cord and hose for vacuum pump.
3.2 Hazardous areas and safety equipment
Description of the risk areas of the furnace:
Hazardous area Type of risk
Firing chamber Risk of burning
Opening / closing mechanism Risk of crushing
Electric components Risk of electric shock
Description of the safety equipment of the furnace:
Safety equipment Protective effect
Protective conductor Protection from electric shock
Electric fuses Protection from electric shock
Furnace housing and covers Protection from electric shock, burning and crushing
To Next Page
Loading...
