Ivoclar Vivadent Programat EP3010 - 10 Appendix; Firing Program Table; Press Program Table

77
10.1 Firing program table
A program table (°C / °F) is enclosed in these Operating Instructions. Should this not be the case, please contact the Ivoclar
Vivadent Service Center.
Important information
The current program tables are also available at:
www.ivoclarvivadent.com/downloadcenter
The program tables can be downloaded from the Internet as PDF files. Please note, that the version of the firing program
table should correspond to the software version which is used on your furnace.
10.2 Press program table
Material
Investment ring size
100 g 200 g 300 g
IPS e.max Press Multi •
IPS e.max Press HT • •
IPS e.max Press MT • •
IPS e.max Press LT • •
IPS e.max Press MO • •
IPS e.max Press HO • •
IPS e.max Press Impulse • •
IPS e.max ZirPress • • •
IPS Empress Esthetic • •
IPS Inline Press-on-Metal • • •
10. Appendix