3
Table of Contents
List of parts 4
1. Introduction / Signs and Symbols 7
1.1 Introduction 7
1.2 Signs and symbols used in these Operating Instructions 7
1.3 Notes regarding the Operating Instructions 7
1.4 Notes on the different voltage versions 8
1.5 Notes on the images in these Operating Instructions 8
2. Safety First 9
2.1 Indications 9
2.2 Health and safety instructions 12
3. Product Description 14
3.1 General 14
3.2 Hazardous areas and safety equipment 14
4. Installation and Initial Start-Up 15
4.1 Unpacking and checking the contents 15
4.2 Selecting the location 15
4.3 Assembly 16
4.4 Removing the furnace head 19
4.5 Initial start-up 19
5. Operation and Configuration 22
5.1 Introduction to the operation 22
5.2 Firing programs and programming options 26
5.3 Managing programs 38
5.4 Press programs and programming options 40
5.5 Advanced functions of the furnace 44
6. Practical Use 57
6.1 Firing procedure with an Ivoclar Vivadent program 57
6.2 Firing procedure with an individual program 58
6.3 Press procedure using an Ivoclar Vivadent press program 60
6.4 Press procedure by means of FPF – fully automatic press function 61
6.5 Press procedure using an individual press program 63
7. Maintenance, Cleaning and Diagnosis 65
7.1 Monitoring and maintenance 65
7.2 Cleaning 66
7.3 Service note 66
7.4 Stand-by 66
7.5 Power-saving mode 66
7.6 Replacing the press plunger 67
8. What If ... 69
8.1 Error messages 69
8.2 Additional error messages 71
8.3 Technical malfunctions 72
8.4 Repair 73
8.5 Resetting to factory settings 73
9. Product Specifications 75
9.1 Delivery form 75
9.2 Technical data 75
9.3 Acceptable operating conditions 76
9.4 Acceptable transportation and storage conditions 76
10. Appendix 77
10.1 Firing program table 77
10.2 Press program table 77
To Next Page
Loading...
