64
6. Practical Use
Step 5:
Enter the parameters.
Now enter your individual parameters and create the desired press
program.
Step 6:
Load the furnace.
Open the furnace head using the OPEN FURNACE HEAD key and place the investment ring into the furnace.
Step 7:
Start the program.
Activate the program by pressing the START key. The LED lights up in
green. The progress of the program is shown in the display.
The furnace head opens automatically at the end of the program.
When the Optical Status Display lights up in green, the furnace is
ready for the next program start.
To Next Page
Loading...
