Menu overview
6 720 645 504 (2011/04) en
50
15 Menu overview
The top menu level for installers is:
• Room temperature
• Hot water
• Holiday
• Timers
• External control
• Installer
• Additional heat
• Safety functions
• General
• Alarms
• Access level
• Return to factory settings
• Program version
Access level 0 = Customer
Access level 1 = Installer
HP x = Heat pump 1 or 2 / Compressor 1 or 2
Room temperature
Access
level
General Summer/winter operation Circuit 1, Circuit 2, 3...
> Winter operation
> Outdoor temperature limit for change
over
> Delay before change over to winter
operation
> Delay before change over to summer
operation
> Direct start limit for winter operation
0
0
1
1
1
Shut down protection during change over from
hot water to heating
1
Minimum outdoor temperature
1
Tab. 29 Room temperature menus
To Next Page
Loading...
