EasyManuals Logo

IVT Greenline HC 22 User Manual

IVT Greenline HC 22
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #75 background imageLoading...
Page #75 background image
Settings
6 720 645 504 (2011/04) en
75
Anti-seizure mode in summer mode
Anti-seizure mode in winter mode
>> Highest permitted flow temperature T1
> Operating mode
B For a description of operating modes (
Chapter 6.4).
> Groundwater
>> Groundwater
B Indicate if groundwater pump G33 exists or not.
G33 is normally run simultaneously with collector
circuit pump G3.
In the event of Yes:
>> Compressor start delay
B Indicate the delay that is required until the
groundwater circuit circulates. The compressor
should not start before this has taken place.
There will be no delay under certain circumstances.
Anti-seizure mode starts only if there is no
other type of demand. When there is a
demand, the anti-seizure operation waits for
one hour at the most for the demand to be
satisfied. Otherwise, the anti-seizure
operation has to wait until the next
occasion.
Heat pump 1 runs first followed by heat
pump 2, etc. 3-way valves and circulation
pumps are run for 1 minute and mixing
valves for the respective mixing valve's run
time + 10s. A pause of 30s is made between
components.
During anti-seizure mode, certain parts of
the heating system become hot for a short
period of time, which is completely normal.
The anti-seizure mode is not cancelled if hot
water demand arises during the anti-seizure
operation. The hot water temperature can
thereby fall. A suitable time for anti-seizure
operation is when the hot water
consumption is low, e.g., at night.
In winter mode, anti-seizure operation is
executed on valves, mixers and pumps that
normally do not operate in winter mode
(refers to accessories such as cooling, pool
and solar). Anti-seizure mode can occur
during operation.
Factory setting 80,0 °C
Lowest value 10,0 °C
Highest value 100,0 °C
Tab. 132 Radiator
Factory setting 45,0 °C
Lowest value 10,0 °C
Highest value 45,0 °C
Tab. 133 Underfloor
Factory setting
Alternative L/W mixed additional heat
Tab. 134 Operating mode
Factory setting No
Alternative Yes/No
Tab. 135 G33
Factory setting 15s
Lowest value 0s
Highest value 600s
Tab. 136 Start delay compressor

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the IVT Greenline HC 22 and is the answer not in the manual?

IVT Greenline HC 22 Specifications

General IconGeneral
BrandIVT
ModelGreenline HC 22
CategoryHeat Pump
LanguageEnglish

Related product manuals