Output Switch Control
You can enable or disable any output port or all output ports. Output ports are enabled by
default. Operation:
① In the main menu, select "Video" and press "ENTER" button
② Press “Up and Down” buttons to select “On/Off”
③ Press "ENTER" button to enter the next sub-menu
④ Press “Up and Down” buttons to select “Output 1-4”
⑤ Press "ENTER" to enter the next sub-menu
⑦ Press the “Up and Down” buttons to select “Off” or “On”
⑧ Press "ENTER" button to apply your selection
To Next Page
Loading...
Need help?
General