J-Tech Digital JTD-669 - RS232 Communication Setup; CommUart Assistant Configuration; Sending RS232 Commands; RS232 Command Format

20
RS232 Control
Open CommUart Assistant
Comport Settings:
Choose correct COM port that connects to the PC in the parameter configuration area
Baud Rate:
115200 bps (Default)
Parity:
None
Data Bit:
8 bit
Stop Bit:
1 bit
Sending Port Commands:
Command List:
1). All commands start with “#”
2). “_” the underline cannot be omitted.
3) Command head, Parameter and target need to have one “SPACE”.
The following table is only an example. Please refer to the list of instructions.
Type Format Value Regulation
Command head #cmd without
Explain
Can be used to search command, after receiving command, the system will
feedback all open command format fields
Example1
#cmd
Search all open command