1
TABLE OF CONTENTS
1. INTRODUCTION 3
2. OPERATING THE JABLOTRON 100
+
SYSTEM 3
2.1 ON-SITE OPERATING 5
2.1.1 USING THE SYSTEM KEYPAD 5
2.1.2 KEYPAD CODE AUTHORIZATION 7
2.1.2.1 ALARM SETTING 9
2.1.2.2 ALARM UNSETTING 9
2.1.2.3 DURESS ACCESS CONTROL 10
2.1.2.4 PARTIAL ALARM SETTING 10
2.1.2.5 TERMINATING A TRIGGERED ALARM 10
2.1.2.6 SECTION CONTROL FROM THE MENU OF THE KEYPAD WITH AN LCD DISPLAY 11
2.2.1 USING THE JA-110E AND JA-150E SYSTEM KEYPADS 12
2.2.1.1 ALARM SETTING 14
2.2.1.2 ALARM UNSETTING 14
2.2.1.3 PARTIAL ALARM SETTING 15
2.2.1.4 DURESS ACCESS CONTROL 16
2.2.1.5 TERMINATING A TRIGGERED ALARM 16
2.2.1.6 SECTION CONTROL BY AUTHORIZATION 17
2.2.1.7 SECTION CONTROL FROM THE KEYPAD’S MENU 17
2.2.2 OPERATING THE SYSTEM WITH A KEYFOB 17
2.2.3 OPERATING THE SYSTEM USING A COMPUTER (J-LINK) 18
2.3 REMOTE OPERATING 18
2.3.1 OPERATING THE SYSTEM USING THE MyJABLOTRON SMARTPHONE APP 19
2.3.2 OPERATING THE SYSTEM VIA THE MyJABLOTRON WEB INTERFACE 19
2.3.3 OPERATING THE SYSTEM USING THE VOICE MENU 19
2.3.4 OPERATING THE SYSTEM USING SMS COMMANDS 20
2.3.5 OPERATING THE SYSTEM REMOTELY USING A COMPUTER (J-LINK) 20
2.3.6 CONTROLLING THE PROGRAMMABLE OUTPUTS (PG) 20
2.3.6.1 KEYPAD SEGMENT 20
2.3.6.2 USER KEYPAD AUTHORIZATION 20
2.3.6.3 FROM THE MENU OF THE KEYPAD WITH AN LCD DISPLAY 20
2.3.6.4 REMOTE CONTROL 21
2.3.6.5 MyJABLOTRON SMARTPHONE APP 21
2.3.6.6 MyJABLOTRON WEB INTERFACE 21
2.3.6.7 DIALLING-IN 21
2.2.6.8 SMS MESSAGE 21
3. BLOCKING/DISABLING IN THE SYSTEM 21
3.1 BLOCKING USERS 21
3.2 BLOCKING DETECTORS 21
3.3 DISABLING TIMERS 22
4. CUSTOMIZING THE SYSTEM 22
4.1 CHANGING A USER ACCESS CODE 22
4.2 CHANGING, DELETING OR ADDING AN RFID CARD/TAG 22
4.3 CHANGING A USERNAME OR PHONE NUMBER 22
4.4 ADDING/DELETING A USER 22
4.5 CALENDAR EVENTS SET UP 23
To Next Page
Loading...
Need help?
General
