8 2. OPERATING THE JABLOTRON 100
+
SYSTEM
Structure and description of the internal LCD keypad menu
Cancel warning
indication
Section Control
PG control
Event memory
Setting
prevented
Faults in
system
Bypassed
detectors
System status
Settings
Display setting
Maintenance
mode
Allows you to cancel alarm/unsuccessful setting
indication in all sections to which the user has
access rights
Allows you to control the system‘s sections
to which the user has access rights and are
enabled in the internal settings.
Allows the user to control PG programmable
outputs depending on the user’s permissions and
according to the internal settings.
Displays a detailed list of the event memory.
Shows a list of triggered detectors preventing
setting the system, provided this option
is activated in the control panel configuration.
Displays a list of all detectors indicating
system faults from sections to which the user
has access rights.
Displays a list of all blocked detectors in sections
to which a user has access rights.
Shows system status (list of triggered detectors,
triggered tamper contacts, low batteries,
bypassing, etc.).
Allows editing of users and devices
(only when USB is disconnected).
Allows adjustment of keypad backlight intensity
and display contrast.
Allows the Administrator to switch assigned
sections to the Maintenance mode.
Administrator or
User authorization
by the code or RFID
tag/card
To Next Page
Loading...
Need help?
General
