07610-004-43-79-Q
12
OPERATING INSTRUCTIONS
OPERATION
1. Verify strainers are in place and clean.
2. Ensure wash and rinse arms are screwed securely in place and end-caps are tight.
3. Verify wash and rinse arms rotate freely.
4. Conrm chemical levels are correct.
To energize machine, turn on power at service breaker. The voltage should have
been previously veried as correct. If not, voltage must be veried before energizing
machine.
1. Press Power button.
2. Machine will automatically begin fill cycle.
3. Once wash tub is filled, machine displays "HEATING."
4. Wait for wash temperature to display at least 155 °F and for status to display
"READY" before operating machine.
PREPARATION
POWER UP
FILLING THE
WASH TUB
155
F
READY
CYCLE 1
CAUTION! Preparation
section must be followed
before operating machine!
!
CAUTION
To Next Page
Loading...
