07610-004-43-79-Q
20
PREVENTATIVE MAINTENANCE
MAINTENANCE
5. Do not overll racks.
6. Ensure glasses are placed upside-down in the rack.
7. Ensure all chemicals being injected into machine have been veried at correct
concentrations.
8. Clean machine at end of every workday (see Shutdown and Cleaning section).
9. If hard water is present, install an SPS into water line connecting to machine
(see Water Supply Connections section).
10. Always contact a qualied service agency when a serious problem arises.
11. Follow all safety procedures, whether listed in this manual or put forth by local,
state, or national codes/regulations.
PREVENTATIVE
MAINTENANCE
To Next Page
Loading...
