en-20
SPECIFICATIONS 4
The machine was tested for Whole Body vibration levels. The operator was in the normal position to drive the
vehicle, with two hands on the steering mechanism. The cutting device was in rotation with the machine driven in
a straight line at 6 Km/hr on a level and cut lawn.
The Machinery Safety Directive 2006/42/EC
By compliance to:
Whole Body EN1032:2003
Information Supplied for Physical Agents Directive 2002/44/EC
By reference to:
Whole Body Standards BS EN ISO 2631-1 (1997)
Product Name
Hand / Arm
Acceleration
Level
250 with ROPS Series ## with Cab
Max. LH or RH Accelerations m/s²
Mean Value of X, Y, Z Aeq
0.66 ± 0.40 ### ± 0.40
Product Name
Hand / Arm
Acceleration
Level
305 with ROPS Series ## with Cab
Max. LH or RH Accelerations m/s²
Mean Value of X, Y, Z Aeq
0.7 ± 0.40 ### ± 0.40
Product Name
Hand / Arm
Acceleration
Level
405 with ROPS Series ## with Cab
Max. LH or RH Accelerations m/s²
Mean Value of X, Y, Z Aeq
0.99 ± 0.40 ### ± 0.40
Product Name
Whole Body
Acceleration
Level
250 with ROPS Series ## with
Cab
Max. Accelerations m/s²
Mean Value of X, Y, Z Aeq
0.78 ± 1.57 ### ± 1.57
Product Name
Whole Body
Acceleration
Level
305 with ROPS Series ## with
Cab
Max. Accelerations m/s²
Mean Value of X, Y, Z Aeq
0.83 ± 1.57 ### ± 1.57
Product Name
Whole Body
Acceleration
Level
405 with ROPS Series ## with
Cab
Max. Accelerations m/s²
Mean Value of X, Y, Z Aeq
0.9 ± 1.57 ### ± 1.57
To Next Page
Loading...
Need help?
General
