4-52
4
OPERATION AND ADJUSTMENTS
ARBUS 400Clean water tank for handwashing
• The water tank for handwashing (A) is a
plastic recipient with a 12 liter capacity.
• Placed on an easily accessible configura-
tion, this recipient should always be fil-
led with water for hand sanitization and
other body parts that may have had con-
tact with chemicals during the handle of
these products.
BP pressure gauge kit
• The BP PRESSURE GAUGE KIT (Low Pressu-
re) was designed to check the actual spray
pressure at the nozzles. Can be installed
on the sprayers that use both universal
connections and boots as well as more
complete nozzle holders like the Quadri-
jet and Bijet.
The BP PRESSURE GAUGE KIT uses a
low pressure gauge (100 psi). The pres-
sure regulators, which usually equip the
sprayers, can easily reach pressures above
100 psi², which will damage the pressure
gauge. To increase the durability of the
pressure gauge, close the valve after reg-
ulating the pressure.
• Safety notes when using the BP pressure
gauge kit.
ATTENTION!
Use the water in the deposit
only to wash hands and body
parts that came into contact
with chemicals.
Optional: accessory supplied upon request,
does not come with the equipment.
To Next Page
Loading...
