Jacto ARBUS 400 - Instruc Tions for Chemical Produc T Dilution

4-61
4
OPERATION AND ADJUSTMENTS
ARBUS 400 Instruc tions for chemical product dilutions
Mix preparation
• Carefully read the chemical product leaflet.
• Put the product in a recipient with a little
amount of water. Shake the mix.
• Add the amount of water that is needed
to fill out the recipient.
• Shake until a homogenous mix is achieved.
• Add the mix prepared to the working
recipient.
• Mount the lid of the working recipient
and make sure it has no leaks.
ATTENTION!
During handle and use of che-
mical products, always follow
the technical guidelines.