5-86
5
MAINTENANCE
ARBUS 400Operation chart
Table 8: Operation
Operation chart
Periodicity
when re
-
ceiving the
equipment
when using the
equipment for
the rst time
whenever
spraying
whenever
lling the
tank
Strictly follow the information contained in
this instructions manual.
•
C
heck all components for integrity. •
Check the accessory box components
.
•
Demand for assembly of components and
accessories, operation and maintenance.
•
Perform cleaning and lubricate all drive
shaft grease points.
•
Check whether the pins and cotter pins
used at the three points are original parts.
•
Make sure about the PTO shaft clearances. •
Check whether the coupling pins are proper-
ly provided with cotter pins.
•
R
emove the pull bar from tractor. •
Adjust commands to prevent the same from
causing impacts on tractor during opera-
tions.
•
Check the grease ttings for lubrication. •
Retighten the reservoir fastening nuts. •
Use personal protec tions equipment (PPEs). •
Do not travel at excess speeds. •
Do not spray chemical against the wind
direction.
•
Caution with electric networks. •
D
o not smoke, eat or drink during the ap-
plication.
•
After the work, take off clothing and take a
shower.
•
Clean the suction filter. •
Clean nozzles and their strainers. •
To Next Page
Loading...
