JADEVER SCALE CO., LTD - www.dongminhphat.com
20 JCL Service Manual - www.cantudong,com
The accumulated number of
weighments, total count or weight
exceeds display range.
The quantity of weighed articles
exceeds display range when the
scale is under unit weight entering
or sampling mode.
----------------------------------------
Recharge the battery. The scale
can be used while it is recharging.
6. Parts replacement
Please switch off the scale before part replacement.
6-1 Main board replacement
1. Remove the weighing pan. 2. Turn the scale upside down, loosen and
remove the 4 fixing screws.
3.Open the upper housing. 4. Remove the keypad from board.