janitza UMG 508 - RS485; Protocol selection; Device address setting

49
UMG 508
RS485
You can specify the protocol, the device address
and the Baud rate for operating the RS485 inter-
face.
Protocol
Selection options:
• Modbus Slave
• Modbus Master/Gateway
• Profibus DP V0
• BACnet (Option)
Factory pre-setting:
Modbus Master/Gateway
Device address
Setting range: 0 - 255
Factory pre-setting: 1
Baud rate
Setting range: 9.600, 19.200, 38.400, 57.600,
115.200, 921.600 kbps
Factory pre-setting: 115.200 kbps