5
UMG 508
Application Information
Please read this operating manual and all other
publications that have to be consulted to work
with this product (particularly for installation,
operation or maintenance).
Please pay attention to all safety regulations and
warning information. If you fail to follow the in-
formation, it can result in personal damage and/
or damages to the product.
Any unauthorized change or use of this device
beyond the specified mechanical, electrical or
other operating limits can cause personal da-
mage and/or damage to the product.
Any such unauthorized change represents "mi-
suse" and/or "negligence" in the sense of gua-
rantee for the product and therefore makes the
guarantee covering possible consequential da-
mages void.
This device is to be exclusively operated and
maintained by a specialist.
Specialists are persons who, due to their rele-
vant training and experience, are capable of re-
cognizing risks and avoiding possible hazards
that can be caused when operating or servicing
the device.
When using the device, the necessary legal and
safety regulations should be considered additio-
nally for the respective application case.
Caution!
If the device is not operated according
to the operating manual, protection is
no longer ensured and the device may
cause dangers.
c
Cables with single wires must be provi-
ded with ferrules.
Only screw plugs with the same pole
number and the same type of const-
ruction can be plugged together.
m
m
To Next Page
Loading...
Need help?
General
