Application notes
Please read these operating instructions and all other
publications that must be consulted in order to work
with this product (particularly for installation, operation
or maintenance).
Please observe all safety regulations and warnings. Non-
compliance with the instructions can lead to personal
injury and/or damage to the product.
Any unauthorised alteration or use of this device which
exceeds the specified mechanical, electrical or other
operational limits can cause personal injury and/or
damage to the product.
Any such unauthorised alterations are grounds
for “abuse” and/or “negligence” in terms of the product’s
guarantee and thus excludes the warranty for covering
any possible resulting damages.
This device must only be operated and maintained
by qualified personnel.
Qualified personnel are persons who, due to their
respective training and experience, are able to recognise
risks and avoid potential hazards that can be caused
by operation or maintenance of the device.
When using the device, the legal and safety regulations
required for the respective application must also be
observed.
c
Safety is no longer guaranteed and the
device may be dangerous if the device is
not operated according to the operating
instructions.
m
Conductors consisting of single wires must
be provided with ferrules.
m
Only screw terminals with the same
number of poles and the same type may
be plugged together.
To Next Page
Loading...
Need help?
General
