janitza UMG 96RM-P - USB Interface

18
UMG 96RM-P/-CBM
USB interface
The Universal Serial Bus (USB) enables a rapid and
uncomplicated connection between the device and
a computer. After the installation of the USB driver
the device data can be read out via the GridVis software
and firmware updates can be installed.
The USB2.0 connection cable with A/B connectors
included in the scope of deliverables is required for
the USB connection of the device to the USB interface
of the computer.
USB A/B
PC
m
The cable length of the USB connection
should not exceed 5m.