janitza UMG 96RM-P - Operation and Configuration; Operation

46
UMG 96RM-P/-CBM
Declaration of conformity
The UMG 96RM-P/-CBM fulfils the following protection requirements:
Directive 2004/108/EC in conjunction with DIN EN61326-1:2006-10 (IEC 61326-1) as well as the
Directive 2006/95/EC in conjunction with DIN EN 61010-1:2002-08 (IEC 61010-1)
Standards taken into consideration:
Immunity from interference
DIN EN 61326-1:2006-10 (IEC 61326-1) Electrical equipment for control systems and laboratory use –
EMC requirements. Class A: Industrial area
DIN EN 61000-4-2:2009-12 (IEC 61000-4-2) Discharge of static electricity 4kV/8kV
DIN EN 61000-4-3:2008-06 (IEC 61000-4-3) Electromagnetic HF field 80-2700MHz
DIN EN 61000-4-4:2005-07 (IEC 61000-4-4) Rapid transients 1kV/2kV
DIN EN 61000-4-5:2007-06 (IEC 61000-4-5) Voltage surges 1kV/2kV
DIN EN 61000-4-6:2009-12 (IEC 61000-4-6) Conducted HF signals 3V
DIN EN 61000-4-8:2001-12 (IEC 61000-4-8) Electromagnetic fields, 100A/m;
DIN EN 61000-4-11:2005-02 (IEC 61000-4-11) Voltage drops/short-term interruptions
Emissions
DIN EN 61326-1:2006-10 (IEC 61326-1) Electrical equipment for control systems and laboratory use –
EMC requirements:
Class B: Residential, business and commercial areas.
DIN EN 61326-1/7.2 (CISPR 11) Radiated emission strengths 30MHz – 1GHz
DIN EN 61326-1/7.2 (CISPR 11) Radiated interference voltage 0.15MHz – 30MHz
Equipment safety
DIN EN 61010-1:2002-08 (IEC 61010-1) Safety provisions for electrical equipment for measurement,
control and laboratory use.