Janome 5300QDC - Page 50

48
Start sewing
z Fold back the left seam allowance. Turn the right seam
DOORZDQFHXQGHUWRIRUPDWRFPßPDUJLQ
Place the zipper teeth next to the fold and pin in place.
6HWWKHVWLWFKOHQJWKDQGWKUHDGWHQVLRQEDFNWRWKH
original setting.
qWRFPßPDUJLQ
w Zipper teeth
e Fold
r End of the zipper opening
t Opening size
z
x
c
q
r
e
t
x Attach the zipper foot E with the pin on the right hand
side.
Lower the foot onto the topside at the end of the
zipper opening so that the needle pierces the fabric
next to the fold and the zipper tape.
c6HZWKURXJKDOOOD\HUVQH[WWRWKHIROG
  6WRSWKHPDFKLQHFPßEHIRUHWKHIRRWUHDFKHV
the slider on the zipper tape.
Lower the needle slightly into the fabric.
Raise the foot and open the zipper to clear the slider.
Lower the foot and stitch the remainder of the seam.
y6OLGHU
uFPß
u
w
CAUTION:
Be sure that the needle does not strike the presser
foot or zipper teeth when the zipper foot is attached.
y