Janome 5812 - Bobbin Winding; Setting the Spool Pin; Setting the Spool; Removing the Bobbin

www.toews.com
8
Bobbin Winding
Setting the spool pin
Insert the spool pin into the hole as shown.
q Spool pin
w Hole
Setting the spool
Place a spool of thread on the spool pin with the thread
coming off the back of spool as illustrated.
A: Press the large spool holder q firmly against the spool
of thread.
q Large spool holder
B: For a small spool, use the small spool holder w.
w Small spool holder
Removing the bobbin
z Push the hook cover plate release button q to the right
and remove the cover plate.
q Hook cover plate release button
w Hook cover plate
x Lift out the bobbin.
e Bobbin
q
w
(A)
(B)
q
w
e
z
x
q
w
Janome 5812 Instruction Manual
www.toews.com
5812 Owners Manual/ User Guide