Janome 5812 - Replacing the Bobbin Holder

www.toews.com
29
SECTION VII. CARE OF YOUR MACHINE
Replacing the Light Bulb
NOTE:
* Unplug the machine.
* Do not dismantle the machine other than as explained
in this section.
* Do not store the machine in a high-humidity area, near
a heat radiator, or in direct sunlight.
* Clean the outside of the machine with a soft cloth and
mild soap.
Remove the screw. Remove the face plate.
q Screw
w Face plate
Push and turn the bulb counterclockwise to remove it.
Push and turn the bulb clockwise to replace it.
e Light bulb
CAUTION:
As the light bulb could be HOT, protect your fingers when
you handle it.
Cleaning the Hook Race and Feed Dogs
z Remove the presser foot and needle. Remove screw
on the needle plate with the screwdriver.
Remove the needle plate and take out the bobbin.
q Screw
x Lift up the bobbin holder and remove it.
w Bobbin holder
c Brush out dust and lint. Wipe the bobbin holder with a
soft, dry cloth.
v Clean the feed dogs and hook area with a brush.
e Feed dogs
b Wipe the hook race with a soft, dry cloth.
r Hook race
NOTE:
You may also use a vacuum cleaner.
w
e
q
c
q
w
e
r
z
x
v
b
Janome 5812 Instruction Manual
www.toews.com
5812 Owners Manual/ User Guide