Janome 5812 - Replacing the Bobbin Holder

www.toews.com
30
Replacing the Bobbin Holder
z Insert the bobbin holder into the hook race.
x Make sure the knob of the bobbin holder fits next to the
stopper on the race.
q Knob
w Stopper
c Replace the bobbin.
Attach the needle plate. Tighten the screw firmly with
the screwdriver.
e Screw
CAUTION: Do not pull the fabric or turn the handwheel
when threads or fabric are tangled in the hook area.
Remove the needle plate in order to remove the tangled
threads.
CAUTION: Do not apply oil to the bobbin holder or hook
area, as oil may degrade the bobbin holder.
q
w
e
z
x
c
Janome 5812 Instruction Manual
www.toews.com
5812 Owners Manual/ User Guide