Janome 5812 - Applique; Pin Tucking

www.toews.com
24
Baste applique pieces on the fabric, or fuse the applique
pieces with iron-on fabric joiner. Stitch around the applique
making sure the needle falls along the raw edge of the
applique.
Applique
Machine setting
q Stitch selector: B – C
w Stitch length: 0.5 – 1
e Needle thread tension: 1 – 4
r Presser foot: Zigzag foot: A
Pin Tucking
Machine setting
q Stitch selector: A
w Stitch length: 1.5 – 3
e Needle thread tension: 2 – 6
r Presser foot: Blind hem stitch foot: G
Fold the fabric wrong sides together and lower the needle
into the fabric 0.1 – 0.2 cm inside the folded edge.
Lower the foot and turn the screw to align the guide on the
foot with the folded edge.
Sew slowly while guiding the folded edge along the guide.
Open the fabric and iron press the tucks.
q Screw
w Guide
e Folded edge
q
w
e
we
r
q
we
r
q
Janome 5812 Instruction Manual
www.toews.com
5812 Owners Manual/ User Guide