27
Serging
Machine setting
q Stitch selector: G
w Stitch length: S.S.
e Needle thread tension: 3 – 7
r Presser foot: Zigzag foot A
This stitch is ideal for 1/4˝ (0.6 cm) seams on knits or on
medium to heavy weight woven fabrics where you want a
narrow seam. It is also great for sewing spandex swim
wear. Place the fabric under the presser foot [A] so that the
stitches are made over the raw edge.
Overcast Stretch Stitching
Machine setting
q Stitch selector: E or F
w Stitch length: S.S.
e Needle thread tension: 2 – 6
r Presser foot: Zigzag foot: A
This stitch is for sewing a seam with an overcast finish. It is
used when making swim wear, ski pants and other
garments which require stretch.
• To sew
Place raw edges of fabric to the “left” of the needle as
shown. Sew in a manner so that the needle pierces the
fabric very close to the outside edge. Or place the fabric
to allow a 5/8˝ (1.6 cm) seam, then trim the seam
allowance. Raw or worn edges of older garments can
be overcast to prevent further raveling.
we
r
q
we
r
q
Janome 5812 Instruction Manual
5812 Owners Manual/ User Guide
To Next Page
Loading...
