Janome 5812 - Lace Work; Shell Stitch

www.toews.com
25
Lace adds a fanciful, feminine touch to blouses and
lingerie. Table linens and pillows become more elegant
when trimmed with lace.
Fold the raw edge of the fabric at least 5/8˝ (1.5 cm).
Place lace underneath and topstitch with blind hem stitch.
Trim excess fabric close to stitching.
Lace Work
Machine setting
q Stitch selector: E
w Stitch length: 1
e Needle thread tension: 1 – 4
r Presser foot: Zigzag foot: A
Shell Stitch
Machine setting
q Stitch selector: G
w Stitch length: 2 – 3
e Needle thread tension: 6 – 8
r Presser foot: Zigzag foot: A
Use a lightweight fabric (tricot, for example). Fold the
fabric in bias and stitch on the fold. Allow the needle to
just clear the folded edge to create a shelled edge. You
may need to increase the needle thread tension slightly.
If you sew rows of shell stitches, space the rows at least
5/8˝ (1.5 cm) apart. You can also sew shell stitches on
knits or soft silky woven fabrics, in any direction.
we
r
q
we
r
q
Janome 5812 Instruction Manual
www.toews.com
5812 Owners Manual/ User Guide