Janome MC 11000 - Replacing Printed Circuit Board B; Printed Circuit Board B Replacement

MC 11000
(A)
Replacing Printed Circuit Board B
To remove:
1. Remove the belt cover.
Turn the machine to the back.
2. Remove the base (1).
3. Remove the 2 screws (A) and remove printed circuit
board B case (2) and circuit board B (3).
4. Disconnect the herness (4) from printed circuit board
B.
To attach:
5. Follow the above procedure in reverse.
(1)
(2)
(2)
(3)
(4)
14
www.promelectroavtomat.ru