(A)
(B)
(C)
(D)
Changing External Parts (5)
To remove:
1. Open the face cover and remove the top cover, belt
cover and extension table.
2. Remove the screw (A) and remove the rear arm thread
guide (1).
3. Loosen the screw (B).
4. Loosen the screw (C) and remove the screw (D).
5. Disconnect each connector and remove the front
cover.
Note: Unlock the hooks (2) while removing the front cover.
To attach:
6. Follow the above procedure in reverse.
Front cover
(1)
(2)
5
www.promelectroavtomat.ru
To Next Page
Loading...
