Janome Memory Craft 8200QC - Traditional Sewing; Straight Stitch Basics

JanomeFlyer.com
27
m “t5” will be shown on the LCD screen. Press u on the
touch panel.
Key position calibration
If the function keys seem out of alignment, calibrate the
key position as follows.
z Enter the setting mode. Press the mode key 4 times to
enter the key position calibration.
x Press the start/stop button q.
c The key position adjustment screen appears and
“t1” is shown on the right side of the screen. With the
touch panel stylus w, press e on the touch panel of
your machine.
v “t2” will be shown on the LCD screen. Press r on the
touch panel.
b “t3” will be shown on the LCD screen. Press t on the
touch panel.
n “t4” will be shown on the LCD screen. Press y on the
touch panel.
q
z x
c
, The screen will be back to the key position adjustment
screen. Press the set key to apply the adjustment.
v
b
n
m
,
e
r ty
u
w
(t1)
(t2)
(t3)(t4)
(t5)
Janome 8200 Sewing Machine Instruction Manual
www.janomeflyer.com
MC8200 Owners Manual/ User Guide